Leifheit Dry & Clean 51001 handleiding

Handleiding

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172/ 72

Afdrukken

Je bekijkt pagina 46 van 72

46GB

NOTE: The powered-on device operates quietly in stand-by mode. The window cleaner ge-

nerates its full power once the rubber lip of the window cleaner is placed on the glass pane

or is lightly pressed. The battery charge lasts longer due to this automatic power control.

• After suction cleaning the window, power off the device by pressing the appliance switch.

2. Interrupting work

• Placethedeviceonitsbase(seegure2)andpoweritoffwhileitisnotinuse.

NOTE: If the window vacuum is not used for 2 minutes while it is switched on (no contact

between rubber lip and a hard surface), the device will switch into sleep mode; the LED

willashingreen.Thevacuumfunctionwillbeactivatedautomaticallyoncetherubberlip

comes into contact with a window pane. To interrupt or stop work for a long period of time,

always use the main power switch to shut the device off.

3. Emptying the container during work

• Ifthemaximumlllevel(marked„MAX“seegure6)ofthedirtywatertankhasbeen

reached, the tank

must be emptied. NOTE: Ifthemaximumlllevelisexceeded,smallamountsofwatermay

leak out of the

ventilation slots if the device is tilted too far. In order to avoid this, empty the tank before the

maximumlllevelisexceeded.

• To do this, power off the device, open the side closure on the dirty water tank and pour the

waterintoacontainerordrain(seegure7)Thenclosethetankagain.

4. Ending work / cleaning the device

• Poweroffthedevice.Unlockthetankviathereleasebuttonandremoveit(seegure8)

NOTE: The device cannot be powered on when the tank is unlocked.

• Remove the bottom cap from the tank and empty it through the opening in the base (see

gure9).Rinsethetankoutwithcleanwater(seegure10).

• Do not put any hard objects, such as a washing-up brush, into the tank as this may cause

damage.

• Releasethesuctionnozzle(seegure11)andcleanbothnozzleandrubberlipunder

owingwater.

• Leave the device to dry fully while in the open position. Charge the battery after the work is

complete.

• Lock the tank before the next use by pushing the tank cover until it connects with

the tank. Be careful to ensure that the tank cover is pushed into the correct position

(seegure12).

• Push the tank onto the basic device from above until you hear the connection make an

audibleclick.Insertthetankintothehousingataslightangle.(seegure13).

CAUTION: The basic unit contains electrical components.

Therefore,donotcleanthebasicunitunderrunningwater!

NOTES

1. Do not use the window cleaner on rough surfaces.

2. Clean the device with a damp cloth.

3. Never submerge the device in water.

4. If your product does not work properly under normal conditions,

please contact your dealer with your proof of purchase.

Figure 7:

Emptying

the tank

Figure 10:

Cleaning the tank

Figure 11:

Release suction

nozzle

Figure 12: Lock the tank cover

Figure 6

the tank

the tank

Figure 8

Figure9

Figure 13:

Attaching

the tank

 

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172/ 72

Bekijk gratis de handleiding van Leifheit Dry & Clean 51001, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Stoomreiniger