Lectrosonics SMV/941 handleiding
Handleiding
Je bekijkt pagina 16 van 24
SMV Series
LECTROSONICS, INC.
16
LectroRM
By New Endian LLC
LectroRM is a mobile application for iOS and Android
operating systems. Its purpose is to remotely control
Lectrosonics Transmitters, including:
• SM Series
• WM
• L Series
The app remotely changes settings on the transmitter
through the use of encoded audio tones, which when re-
ceived by the attached microphone, will alter the cong-
ured setting. The app was released by New Endian, LLC
in September 2011. The app is available for download
and sells for $25 on the Apple App Store and Google
Play Store.
LectroRM’s remote control mechanism is the use of an
audio sequence of tones (dweedles) that are interpreted
by the transmitter as a conguration change. The set-
tings available in LectroRM are:
• Audio Level
• Frequency
• Sleep Mode
• Lock Mode
User Interface
The user interface involves selecting the audio sequence
related to the desired change. Each version has an inter-
face for selecting the desired setting and the desired op-
tion for that setting. Each version also has a mechanism
to prevent accidental activation of the tone.
iOS
The iPhone version keeps each available setting on a
separate page with the list of options for that setting.
On iOS, the “Activate” toggle switch must be enabled to
show the button which will then activate the audio. The
iOS version’s default orientation is upside-down but can
be congured to orient right-side up. The purpose for this
is to orient the device’s speaker, which is at the bottom
of the device, closer to the transmitter microphone.
Android
The Android version keeps all settings on the same page
and allows the user to toggle between the activation
buttons for each setting. The activation button must be
long pressed to activate. The Android version also allows
users to keep a congurable list of full sets of settings.
Activation
For a transmitter to respond to remote control audio
tones, the transmitter must meet certain requirements:
• The transmitter must not be turned o; it can
however be in sleep mode.
• The transmitter must have rmware version
1.5 or later for Audio, Frequency, Sleep and
Lock changes.
• The transmitter microphone must be
within range.
• The transmitter must be congured to enable
remote control activation.
Please be aware this app is not a Lectrosonics
product. It is privately owned and operated by
New Endian LLC, www.newendian.com.
Bekijk gratis de handleiding van Lectrosonics SMV/941, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lectrosonics |
| Model | SMV/941 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5751 MB |
