Lectrosonics M2Ra-B1C1 handleiding
Handleiding
Je bekijkt pagina 12 van 20
M2Ra
LECTROSONICS, INC.12
Menu Item Descriptions
SmartTune
SmartTune™ automates the discovery of a clear operat-
ing frequency. It does this by scanning all the available
operating frequencies within the system’s frequency
block range (in 100 kHz increments) and then select-
ing the frequency with the least amount of RF interfer-
ence. When SmartTune
™
is complete and selection is
conrmed, it returns to the Main Window displaying the
selected operating frequency.
Scan
Use the scan function to identify a usable frequency.
The area in red has not been scanned. Allow the scan to
continue until the entire band has been scanned.
Once a full cycle has been completed, press MENU/SE-
LECT again to pause the scan.
Use the UP and DOWN arrows to roughly tune the
receiver by moving the cursor to an open spot. Press
MENU/SELECT to zoom in for ne tuning.
Use the UP
and DOWN
arrows to
move the
cursor to
an open
frequency in
the spectrum
When a usable frequency has been selected, press the
BACK button for the option to keep your newly selected
frequency or to revert to where it was set before the
scan.
To capture this scan info in the transmitter and thus
make it available to wireless designer, use the SYNC
SCAN menu funtion in the M2T Transmitter.
Flex List
FlexList allows the user to set up a list of proles, by
name, to quickly and easily listen to any of the mixes on
site individually.
Listen - choose a mix from the list and hear what is
transmitting. The list may contain frequencies that are
outside the receiver’s frequency coverage; those entries
will appear grayed out.
Bekijk gratis de handleiding van Lectrosonics M2Ra-B1C1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lectrosonics |
| Model | M2Ra-B1C1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7254 MB |
