LD Systems ANNY 10 BATTERY handleiding
Handleiding
Je bekijkt pagina 3 van 48
GENERAL
QUICK START GUIDE
LD ANNY 10 BATTERY QSG 3
This symbol indicates helpful hints or additional in-
formation.
3.3 GENERAL SAFETY
• Read this user manual carefully.
• Keep this user manual for later reference.
• Follow closely the instructions in this user
manual.
• This user manual is an integral part of the
product. If you sell or pass on the product, you
must include this user manual.
• Only use this device according to its intended
use.
• This device is for professional use only.
• Observe all safety instructions and warning mes-
sages in this user manual, on the device, and on
the packaging.
• Devices are subject to continuous further devel-
opment. If you find discrepancies between the
user manual and the device labeling, the inform-
ation on the device always takes priority.
• Do not remove safety instructions or warning
messages from the device.
• Do not open the device.
• Do not modify the device.
• If the device shows any sign of damage, do not
use it.
• Do not operate the device with removed or miss-
ing covers.
• Do not expose the device to direct sunlight.
• If not further specified in the user manual under
Technical Data, do not use the device in ambient
temperatures that exceed 40°C / 104°F or fall
below -5°C / 23°.
• Do not use the device in tropical climate.
• Do not use the device above 2000m of altitude.
• Unless otherwise stated, do not use under mar-
ine conditions.
• Use only accessories specified by the manufac-
turer.
• Maintenance and repairs may only be carried
out by authorized service personnel.
• Store and transport the device in a dry and safe
environment.
• If the device was exposed to strong temperature
changes, such as during transport, do not switch
it on immediately. Wait until the device has
reached ambient temperature.
3.4 ELECTRICAL SAFETY
• Do not bypass the mains fuse.
• Use only mains fuses as specified by the manu-
facturer.
• Do not use kinked or otherwise damaged power
cables.
• Only operate the device on compliant, tested
and intact mains power outlets.
• Make sure that the voltage and frequency of the
mains power match the values specified by the
manufacturer.
• Take suitable measures against overvoltage,
such as lightning strikes.
• For devices with a power out connector, make
sure the total current consumption of all con-
nected devices does not exceed the value spe-
cified by the manufacturer.
• This device is not suitable for continuous cur-
rent.
• Disconnect the device from all poles before
maintenance, repair or extend periods of non-
use.
• Permanently connected power cables may only
be replaced by a qualified service technician.
3.5 BATTERY SAFETY
Risk of fire, explosion or outgassing. The following
safety instructions must be observed.
• Keep the battery-powered device away from
heat sources and do not expose it to direct sun-
light or fire.
• Always observe the permissible ambient and op-
erating conditions in the user manual under
Technical Data.
Bekijk gratis de handleiding van LD Systems ANNY 10 BATTERY, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | LD Systems |
| Model | ANNY 10 BATTERY |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4758 MB |
