Handleiding
Je bekijkt pagina 5 van 20
5
SAFETY GUIDELINES
Please read and ensure that you understand all of the operating instructions, safety
precautions and warnings in this Instruction Manual before operating or maintaining this
equipment. Save this user manual and keep it with the equipment for future reference. An
accident can often be avoided by recognizing a potentially hazardous situation before it
occurs, and by observing the appropriate safety procedures.
Never use this equipment or modify it in any way that has not been specically
recommended by the manufacturer. Ensure that the heater is maintained, cleaned and
serviced regularly and stored in a suitable environment. Check the equipment for any signs
of damage before use. Contact a qualied electrician for advice on any issues
relating to electrical safety in your working environment
GENERAL EQUIPMENT SAFETY
• Always follow basic safety precautions when using your heater to reduce the risks of re, electric shock, personal
injury, and/or damage to the heater.
• Familiarize yourself with the specications, fuel and electrical supply requirements, equipment controls, warning
labels, and operating instructions before use.
• Do not use the heater in damp or wet locations, such as bathrooms, or expose it to rain. (Refer to the clearance
guidelines included in this document.)
• Never operate the heater in explosive atmospheres or environments containing ammable liquids, gases, dust,
or other combustible substances.
• Keep children, pets, animals, and untrained personnel away from the work area during operation.
• Store the heater in a dry and secure location when not in use.
• Do not modify the machine in any way that could compromise safe operation.
• Keep the work area around the machine clear and free of clutter to prevent accidents and injuries.
• Inspect the equipment and cabling before each use. Do not use the heater if any damage is detected. For repairs
or maintenance, contact Lavorwash Pty Ltd.
• Only use LAVOR replacement parts to maintain safe equipment use and avoid invalidating the warranty.
Repairs should always be carried out by a qualied engineer.
• Do not allow untrained individuals to operate the heater, and never operate it without all covers and housing
properly tted.
• Do not move or handle the heater while it is running or still hot. Always turn it o and allow it to cool before
moving it.
• Never leave the heater unattended while in use. Turn it o and unplug it from the mains supply before leaving
the work area.
• Ensure that the air inlet (rear) and air outlet (front) of the heater are not obstructed.
• Do not use any form of ducting on the front or rear of the heater.
• Always operate the heater in an upright position on a level surface with sucient clearance (see page 7 for
details).
• Never stand on the heater.
LAVOR - IRH-70
USER MANUAL
70,000BTU - Industrial Radiant Heater
www.lavorwash.com.au
WARNING:
No responsibility is accepted for incorrect use of this equipment. Incorrect use can result in
damage to the equipment and danger to the user. Warranty will be void in the event of incorrect
use. The warnings, cautions and instructions discussed in this instruction manual cannot cover
all possible conditions and situations that may occur. It must be understood by the operator
that common sense and caution are factors which cannot be built into this product, but must
be supplied by the operator.
Bekijk gratis de handleiding van Lavor IRH-70, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lavor |
| Model | IRH-70 |
| Categorie | Heater |
| Taal | Nederlands |
| Grootte | 3752 MB |
