Lavex 158LAV09WAKT handleiding
Handleiding
Je bekijkt pagina 5 van 6

INSTRUCTION MANUAL • 5
BATTERY INSTALLING & REPLACEMENT
HOW TO USE
1. Unscrew the security screw
and remove battery housing
from the unit.
2. Insert batteries into the
housing following the
indicated + and - symbols.
3. Insert battery housing back
into the unit, and tighten
security screw to secure.
1. Insert key into the lock on the top cover of the unit, and turn to remove.
2. Remove inner container cover and fill unit with foaming soap.
3. Unscrew the battery housing unit from the bottom of the dispenser, and insert 4 AA batteries
into the housing. Then insert housing back into the unit, and tighten screw to secure.
4. Hold the setting button on the bottom of the unit for 3 seconds, then an LED light will flash
3 times to indicate that the unit is in standby mode.
5. After the LED light flashes, soap will be dispensed when hands are moved into the sensing area.
The unit may require a few senses before dispensing to prime.
6. The LED light will flash 3 times in 30 seconds to indicate low battery power.
Replace batteries when this occurs.
1. Open top cover, add
soap liquid and remove
any overflow.
2. Soap will dispense
automatically when hands
are moved under the
sensing area.
Battery
Cover
AA
Screw
CAUTION
WARNING
• The LED indicator light will flash 3 times when the batteries are low.
• This unit requires 4 AA batteries. Always use new, identical batteries when replacing.
• Children using the unit must be
accompanied by an adult to avoid
injury or malfunction.
• Please ensure proper disposal
of depleted batteries.
• Keep unit dry at all times to avoid
electrical malfunction.
Bekijk gratis de handleiding van Lavex 158LAV09WAKT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Lavex |
Model | 158LAV09WAKT |
Categorie | Niet gecategoriseerd |
Taal | Nederlands |
Grootte | 1124 MB |