Lantronix ION C3110 handleiding
Handleiding
Je bekijkt pagina 12 van 62
Lantronix ION C3110 User Guide
33417 Rev. B https://www.lantronix.com Page 12 of 62
Feature Descriptions
Remote-Fault Detect (RFD)
Remote-Fault Detect monitors the status of the fiber link. When enabled, remote fault detection turns
off the converter’s fiber transmission when the fiber receiver goes down. RFD should only be enabled in
the remote converter; if enabled in both, a link pass-through event will cause an unrecoverable
condition between the converters.
Pause
The pause feature can improve network performance by allowing one end of the link to signal the other
to discontinue frame transmission for a set period of time to relieve buffer congestion. The pause
feature can be set to one of four settings:
• Disable (i.e., no pause)
• Symmetrical pause
• Asymmetric TX (transmit) pause
• Asymmetric RX (receive) pause
Enable the pause feature if it is present on ALL network devices attached to the SIC(s); otherwise,
disable this feature.
Link Pass-Through
The Link Pass-Through feature allows the SIC to monitor both the fiber and copper RX (receive) ports for
loss of signal. Refer to the illustration below. For example, in the event of a loss of an RX signal (1), the
SIC will automatically disable the fiber TX (transmit) signal (2), thus, “passing through” the link loss (3).
The far-end device is automatically notified of the link loss (4), which prevents the loss of valuable data
unknowingly transmitted over an invalid link.
AutoCross (always on)
The AutoCross feature allows either straight-through (MDI) or crossover (MDI-X) cables to be used when
connecting to 10Base-T, 100Base-TX, or 1000Base-T devices, such as hubs, transceivers, or network
interface cards (NICs). AutoCross
determines the characteristics of the cable connection and automatically configures the unit to link up
to its companion device regardless of the cable configuration.
Bekijk gratis de handleiding van Lantronix ION C3110, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lantronix |
| Model | ION C3110 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10528 MB |
