Lantronix AP-GET-SFP-01 handleiding
Handleiding
Je bekijkt pagina 4 van 14
Lantronix 1. Product Introduction
AP-GET-SFP-01 Install Guide 4
1. Product Introduction
This manual describes installation of the AP-GET-SFP-01 Gigabit Ethernet Embedded Media Converter.
Product Description
The AP-GET-SFP-01 provides cost effective, entry-level media conversion between 10/100/1000Base-T ports and
100/1000Base-X fiber ports. It is designed as an embedded solution that can be mounted internally in Tempest
rated computer and networking equipment such as VoIP Phones, Workstations, Thin Clients, Printers, Monitors
and similar devices. Government agencies like Intelligence, Defense, and Foreign Affairs generally require fiber
connectivity to these devices to aid in data security as well as mitigating electro-magnetic emissions.
The converter should be positioned such that the copper connection is internal to the device it is mounted
within, while the fiber is the only port accessible externally. With its fixed configuration, deployments are plug-
and-play and the hot-swappable dual speed SFP slot supports autosensing 100Mbps or 1000Mbps SFP
transceivers. Lantronix offers a wide variety of SFP optical transceivers to meet specific deployment
environments supporting either multimode or single mode fiber.
The copper port and power input share a connection through a 10-Pin interface via a PH Connector. Pins 1 and 2
are used to provide the internal power connection, while pins 3 through 10 are used for the 10/100/1000
Ethernet connection.
This converter is an ideal solution for fiber integration in both Fast Ethernet and Gigabit Ethernet environments,
along with its small size; it is perfect for locations where space is limited.
Ordering Information
SKU
Description
AP-GET-SFP-01
10/100/1000Base-T (10-pin) [100 m/328 ft.] to 100/1000Base-X Open SFP Slot
Embedded Media Converter
Options (sold separately)
Option
Description
TN-GLC-FE-100FX
100Base-FX SFP Module
TN-GLC-SX-MM
1000Base-SX SFP Module
Features
• 10/100/1000Base-T on the copper port
• Fiber 100/1000Base-X open SFP slot
• Supports Power Level III (2W) SFP modules
• Auto-Negotiation enabled
• Auto-sensing 100/1000 SFP port speed
• Auto-MDI/MDIX enabled
• Active Link Pass Through (ALPT) enabled
• Automatic Link Restoration
• Support for Jumbo Frames up to 10,240 bytes
• Power input range from 3.3 to 5 VDC
Bekijk gratis de handleiding van Lantronix AP-GET-SFP-01, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lantronix |
| Model | AP-GET-SFP-01 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3027 MB |
