Lancom WLC-2000 handleiding
Handleiding
Je bekijkt pagina 5 van 17
Security
User administration MAC-based, rate limiting, passphrases, VLAN user based, authentication of IEEE 802.1X clients
via EAP-TLS, EAP-TTLS, EAP-MD5, EAP-GTC, PEAP, MSCHAP, MSCHAPv2, Dynamic Peer Discovery
RADIUS/EAP-server
WLAN protocol filters, IP-redirection of any packet received over the WLAN interface, IEEE 802.1X supplicant,
background scanning, client detection ("rogue WLAN client detection"), Wireless Intrusion Detection System (WIDS)
Others
IEEE 802.1X supplicant, background scanning, client detection ("rogue WLAN client detection"), Wireless Intrusion
Detection System (WIDS)
Others
LANCOM Active Radio Control
Steering of WLAN clients to the ideal access point using 802.11k and 802.11vClient Management
Steering of 5GHz clients to the corresponding high-performance frequency bandBand Steering
Selection of optimal WLAN channels by the administratorManaged RF Optimization*
Better WLAN throughput due to immunity against interferencesAdaptive Noise Immunity
Monitoring your WLAN for sources of interferenceSpectral Scan
Dynamic selection of the optimal WLAN channelAdaptive RF Optimization
Improved utilization of the WLAN bandwidthAirtime Fairness
Depends on the access points in operation. Steering of WLAN clients is not available in US version*) Note
WLAN-Controller
Up to 25 LANCOM Access Points and WLAN routers can be centrally managed by the WLAN controller. Expansion
options are available to extend support up to 2000 LANCOM Access Points and WLAN routers to be managed.
Capacities can be expanded even further by clustering multiple controllers
Number of managed devices
The WLAN controller can switch user data per AP Radio or per SSID in the following ways: – Direct switching to the
LAN at the AP (for maximum performance, e.g. for IEEE 802.11n-based access points) – Logical seperation of user
data into VLANs (e.g. for WLAN guest access accounts) – Central tunneling to the Controller* (layer 3 tunneling
between different IP Subnets)
Smart Controller technology
LANCOM access points and WLAN routers automatically discover the WLAN controller by means of DNS name or
IP addresses. Even AP's at remote sites or in home offices with no direct access to the Controller can be integrated
into the central Controller
Auto Discovery
Access Points can be authenticated manually or automatically. Signaling of new access points by LED, e-mail
message, SYSLOG and SNMP traps. Manual authentication via LANmonitor or WEBconfig GUI tools. Semi-automatic
authentication based on access-point lists in the Controller ('bulk mode'). Fully automatic authentication with default
configuration assignement (can be activated/deactivated separately, e.g. during the rollout phase). Authenticated
access points can be identified by means of digital certificates; certificate generation by integrated CA (Certificate
Authority); certificate distribution by SCEP (Simple Certificate Enrollment Protocol). Access points can be blocked
by CRL (Certificate Revocation List).
Authentication and Authorization
CAPWAP (Control and Provisioning Protocol for Wireless Access Points)Management communication protocol
LANCOM WLC-2000
LCOS 10.80 lancom-systems.com
5 LANCOM Data sheet - Wireless LAN
Bekijk gratis de handleiding van Lancom WLC-2000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lancom |
| Model | WLC-2000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1738 MB |