Handleiding
Je bekijkt pagina 29 van 58
Inspection Process after Installation for LB-ERK24RC-W,
LB-ERK24RC-B
1. Measure the voltage between L1, L2 and N. L1-L2 is 240V;L1-N is 120V; L2-N is 120V.
2.After connecting the power, the cooling fan start running for self-testing and
completing in 10seconds.
3.Check Cooktop:Turn on the knob located on the right. The red indicator light on the right
will ON. The corresponding burner will become red within 1 minutes. The cooling fan in
the upper back will start running at the same time. Repeat the process to check the rest
knobs on the right and burners.
●
If the burner does not become ren within 1minute, check whether the corresponding
knob is adjusted to the manimum power.
●
After the burner reaches the maximum temperature, it is a normal phenomenon that
the burner will repeat the cycle “extinguish - become red - extinguish - become red ”
4.Check Oven:
1) Turn the knob to “ Broil ”. Set the temperature to 500 . ℉ Turn the “ Timer ” to 120
minutes. The cooling fan at the upper back of the electric range will start running at the
same time. Within 5minutes, the upper heating tube in the oven will turn red.
2) Turn the knob to “ Bake” . Repeat the above steps to set the temperature to 500 .
℉
Turn the “Timer” to 120 minutes. The cooling fan will also start running at the same time
like the above steps. The lower heating tube (located under the hidden elements cover )
should turn red in 5 minutes.
3) Turn the knob to “ Broil Conv. ” . Repeat the above steps to check whether the cooling
fan located at upper back of the electric range and the convection fan in the oven will start
running at the same time. The upper heating tube and the center heating tube hidden
near the convection fan should turn red in 5minutes.
4) Turn the knob to “ Bake Conv. ” . Repeat the above steps to check whether the cooling
fan and convection fan will start running. The lower heating tube and the center heating
tube turn red in 5minutes.
5) Turn the knob to “ Oven Light ”, the light in the oven should turn on. Turn the knob to
“ Oven Light OFF ”, the oven light should turn off.
If all the heating elements on the top and inside the oven can work well, it means your
electric range installed correctly . You can start enjoying your new electric ranges now!
if not, please check whether the household voltage is a 3-wire or 4 wire, single-phase
A.C. 208/120 Volt or 240/120 Volt, 60 hertz electrical system. And check whether the
voltage between L1, L2, and N. L1-L2 is 240V; L1-N is 120V and L2-N is 120V.
automatically until you turn off the knob.
Note: If the burners do not become red after a long time wait, it means the wires L1, L2
and N are connected incorrectly. The technician should inspect and correct the error.
6) Install the rotisserie tool. Turn the knob to “ Rotisserie and Oven Light ”, the rotisserie
tool will start rotate, and the light should turn on. Turn the knob to “Rotisserie and Oven
Light OFF ”, Rotisserie should stop rotate and the oven light should turn off.
28
Bekijk gratis de handleiding van Lanbo LB-ERK24RC-B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lanbo |
| Model | LB-ERK24RC-B |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 7298 MB |
