Lamona LAM8721 handleiding
Handleiding
Je bekijkt pagina 32 van 40
32
www.howdens.com
Problem solving (continued)
Problem Reason Solution
Door cannot be opened.
Door lock is activated because of the water level in
the machine.
Drain the water by running the Pump or Spin
programme.
Machine is heating up the water or it is at the
spinning cycle.
Wait until the programme completes.
Child lock is engaged. Door lock will be deactivated
a couple of minutes after the programme has
come to an end.
Wait for a couple of minutes for deactivation of the
door lock.
Door may be stuck because of the pressure it is
subjected to.
Grab the handle and push and pull the door to
release and open it.
Washing takes longer time than
specified in the manual.(*)
Water pressure is low. Machine waits until taking in adequate amount
of water to prevent poor washing quality due to
the decreased amount of water. Therefore, the
washing time extends.
Voltage might be low. Washing time is prolonged to avoid poor washing
results when the supply voltage is low.
Input temperature of water might be low. Required time to heat up the water extends in cold
seasons. Also, washing time can be lengthened to
avoid poor washing results.
Number of rinses and/or amount of rinse water
might have increased.
Machine increases the amount of rinse water
when good rinsing is needed and adds an extra
rinsing step if necessary.
Excessive foam might have occurred and
automatic foam absorption system might have
been activated due to too much detergent usage.
Use recommended amount of detergent.
Programme time does not
countdown. (On models with
display) (*)
Timer may stop during water intake. Timer indicator will not countdown until the
machine takes in adequate amount of water. The
machine will wait until there is sufficient amount
of water to avoid poor washing results due to lack
of water. Timer indicator will resume countdown
after this.
Timer may stop during heating step. Timer indicator will not countdown until the
machine reaches the selected temperature.
Timer may stop during spinning step. Automatic unbalanced load detection system
might be activated due to the unbalanced
distribution of the laundry in the drum.
Machine does not switch to
spinning step. (*)
There might be unbalanced load in the machine. Automatic unbalanced load detection system
might be activated due to the unbalanced
distribution of the laundry in the drum.
The machine will not spin if water is not drained
completely.
Check the filter and the draining hose.
Excessive foam might have occurred and
automatic foam absorption system might have
been activated due to too much detergent usage.
Use recommended amount of detergent.
Washing performance is poor:
Laundry turns grey. (**)
Insufficient amount of detergent has been used
over a long period of time.
Use the recommended amount of detergent
appropriate for water hardness and the laundry.
Washing was made at low temperatures for a long
time.
Select the proper temperature for the laundry to
be washed.
Insufficient amount of detergent is used with hard
water.
Using insufficient amount of detergent with hard
water causes the soil to stick on the cloth and this
turns the cloth into grey overtime. It is difficult
to eliminate greying once it happens. Use the
recommended amount of detergent appropriate
for water hardness and the laundry.
Too much detergent is used. Use the recommended amount of detergent
appropriate for water hardness and the laundry.
Bekijk gratis de handleiding van Lamona LAM8721, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lamona |
| Model | LAM8721 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 11963 MB |
