Handleiding
Je bekijkt pagina 59 van 64
59
Exclusive to Howdens
LAM7006 / LAM7007
Electrical Connections
• If it is not possible to disconnect all poles in the supply power, a disconnection unit with at least 3mm contact
clearance (fuses, line safety switches, contactors) must be connected and all the poles of this disconnection
unit must be adjacent to (not above) the product in accordance with IEE directives. Failure to obey this
instruction may cause operational problems and invalidate the product warranty.
• Additional protection by a residual current circuit breaker is recommended.
Connecting the power cable to the electrical supply
• Only connect the product to a grounded outlet/line with the voltage and protection as specified in the
“Technical Specifications”. Have the grounding installation made by a qualified electrician while using the
product with or without a transformer. The manufacturer shall not be liable for any problems arising due to
the product not being earthed in accordance with the local regulations.
• Before starting any work on the electrical installation, disconnect the product from the mains supply. There is
the risk of an electric shock.
• The product must be connected to the mains supply only by an authorised and qualified person. The
product’s warranty period starts only after correct installation. The manufacturer shall not be held
responsible for damages arising from procedures carried out by unauthorised persons.
• The appliance must be installed so that it can be completely disconnected from the mains
supply. The separation must be provided by a switch built into the fixed electrical installation,
according to construction regulations.
• The rear surface of the oven gets hot when it is in use. Make sure that the electrical connection
does not come into contact with the rear surface otherwise, connections can get damaged.
• The connection cable must not be clamped, bent or trapped or come into contact with hot parts of the oven.
You may cause the oven to short circuit and catch fire as a result of the cable melting. If the power cord is
damaged, it must be replaced by a qualified electrician. Otherwise there is a risk of an electric shock, short
circuit or fire.
• Isolation of the appliance should be within easy reach.
• When wiring, you must comply with national / local electrical regulations and use a socket outlet / line and
plug suitable for the oven. If the power limits of the product exceed the current load capacity of the plug
and socket outlet / line, you must connect the product directly to the fixed
electrical installation without using the plug and socket outlet / line.
• Make sure that fuse rating is compatible with the product.
• Connection must comply with national regulations
• The mains supply data must correspond to the data specified on the type
label of the product. Open the front door to see the type label.
• The power cable of your product must comply with the values given in the “Technical Specifications” on page
56 of this manual.
ON
OFF
FUSE
It is imperative to adhere to the recommended hardwired installation method to ensure
the safety and performance of the appliance.
We categorically advise against any modifications to the intended installation method. If you have any
queries or need assistance, please contact the Lamona service line for further clarification.
Do not power on until correctly installed.
Bekijk gratis de handleiding van Lamona LAM7006, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lamona |
| Model | LAM7006 |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 24034 MB |
