Laica KJ4001 handleiding
Handleiding
Je bekijkt pagina 5 van 92
DECLARATION OF CONFORMITY:
Filtraon systems made by Laica comply with the following
regulatory requirements:
-
I
talian Ministerial Decree no. 174 of 06/04/2004, regulaon
on materials and arcles that may be used in xed
installaons for the collecon, treatment, supply and
distribuon of water intended for human consumpon.
-
Italian Legislave Decree no. 18, 23 February 2023,
implemenng Direcve (UE) 2020/2184 on the quality of
water intended for human consumpon.
- Regulaon 1935/2004/EC on materials and arcles intended
to come into contact with food.
-
R
egulaon (EU) 10/2011 on plasc materials and arcles
intended to come into contact with food.
-
Italian Ministerial Decree no. 25 of 07/02/2012, technical
provisions concerning appliances for the treatment of water
intended for human consumpon.
CAUTION: this appliance requires regular periodic
maintenance to ensure that the treated drinking water meets the
potability standards and that its quality connues to be improved
as stated by the manufacturer.
PRODUCT DESCRIPTION (g.1)
PARTS GUIDE
1.
L
id
2.
Spout
3.
H
opper
4.
Handle
5.
G
lass kele body
6.
Filter cartridge
7.
P
ower base
8.
LCD display
9.
P
ower buon
10.
/ Keep warm / lter change buon
11.
D
ial to set the temperature and me
12.
°F/C° / Temperature seng buon
13.
P
ower cable
EARTHED PLUG
To reduce the risk of electric shock, this appliance is equipped
with an earthed plug (2 terminals and 1 pin). Consult a qualied
electrician if the plug cannot be inserted fully into the power
socket. Do not modify the plug in any way and do not use an
adapter.
TECHNICAL DATA
All food contact materials are food grade.
•
W
ater capacity: Min. 0.5 L, Max.1.5 L
•
Power supply specicaons: 220-240V ~ 50-60Hz 2520-3000W
•
P
lug supplied: CEE 7/7 (EU)
•
Environmental storage condions: +5 °C to 45 °C; relave
humidity ≤95%
OPERATING INSTRUCTIONS
INSTALLATION
A short power cable is provided to reduce the entanglement or
tripping hazards associated with a long cable. Extension cables
can be used, provided that they are used with great care. If an
extension cord is used, the electrical rang of the detachable
power cable or extension cable shall be at least equal to that of the
appliance. The extension must have an earthed 3-wire cable. The
extension cable shall be arranged so that it does not hang from the
worktop or table as it could be pulled by children or pose a tripping
hazard.
USING THE APPLIANCE FOR THE FIRST TIME
1.
R
emove the packaging material and detach any sckers.
2.
When using the product for the rst me, clean it as described in
the “Cleaning and maintenance” paragraph.
3. Connect the power base to a power socket.
4.
ll the hopper with tap water to the Max line on the kele and
close the lid. Boil the water and discard it. Repeat this step two
or three mes.
5.
The kele is now ready for use.
PREPARING THE FILTER
CARTRIDGE
1.
W
ash your hands thoroughly
before proceeding with the
next steps.
2.
Remove the cartridge from
the bag (g. A).
3. Immerse the cartridge in a
container full of cold water
for about 15 minutes (g.
B). Agitate the cartridge to
eliminate the air in it.
4.
P
ut the cartridge into the tank and press gently to insert it
correctly (g. C).
5.
F
ill the hopper with cold tap water up to the MAX level (marked
on the tank) and leave it to lter without closing the lid (g. D).
6.
D
iscard the water ltered in the previous step (or use it to water
your plants).
7.
R
epeat this procedure (steps 5 and 6) 3 mes.
ACTIVATING THE CARTRIDGE REPLACEMENT INDICATOR
Carry out the following steps with the kele o the power base.
1.
Connect the power base plug to a power socket.
2.
P
ress the
buon to switch on the device. Then press the
buon and hold it down for about 3 seconds; the symbol
will appear on the display. This symbol indicates the lifeme of
the lter cartridge and remains visible on the display for 30 days
when the device is connected to the power socket.
3.
When the 30 days have elapsed, the
symbol will appear on
the display.
4. Aer acvang the cartridge replacement indicator, pressing
the
buon again for about 3 seconds will reset the
remaining life of the cartridge; the
symbol will disappear
from the display.
SETTINGS:
MEASUREMENT UNIT °C / °F
The water can be shown on the LCD display in degrees Celsius or
Fahrenheit.
With the appliance on, press the “°F/°C” buon; the measurement
unit (°C or °F) will appear on the display. Press the “°F/°C” buon to
change the measurement unit.
SILENT MODE
The appliance normally beeps whenever a buon is pressed. It can
be set to silent mode.
Switch on the appliance, press the
buon, then press the
buon and hold it down for about 3 seconds; will appear on
the display.
To acvate the beep, press and hold the
buon.
Cauon: when silent mode is set, the appliance beeps when
boiling is nished or when there is an alarm.
5
A
B
C
D
MAX
Bekijk gratis de handleiding van Laica KJ4001, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Laica |
| Model | KJ4001 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 23559 MB |
