LaCie 4big Quadra Enterprise Class handleiding

Niet gecategoriseerd

LaCie

31 pagina's

PDF beschikbaar

Handleiding

LaCie 4big Quadra Enterprise Class • Design by Neil Poulton RAID

User Manual page 18

3.2. Changing the RAID Mode

The 4big comes preconﬁgured in RAID 5 mode. Before you change

the RAID mode of the LaCie 4big, familiarize yourself with the 4big’s

RAID modes. See section 3.1. About RAID Modes.

To change the RAID mode:

1. Unmount or safely remove the 4big Quadra volumes from your

computer, disconnect the interface cable and switch off the

4big.

2. To enter RAID modiﬁcation mode, turn ON the 4big (do not

select “AUTO”) and simultaneously press the front LED button

for 15 seconds. The front LED will blink blue and red.

3. Push the + or - buttons on the RAID mode selector until the

desired RAID number appears (Fig. 14).

NOTE: 0=RAID 0, 1=RAID 10, 2=Concatenation, 3=RAID 3,

4=RAID 3+Spare, 5=RAID 5, 6=RAID 5+Spare, 7=N/A.

NOTE: Although the number 7 appears in the RAID selector, no

RAID changes will take effect if 7 is selected.

4. Validate the mode by pushing the front LED button. The 4big

will start.

5. Connect the 4big’s interface cable. The device is ready to be

reformatted (see section 3.4. Formatting and Partitioning).

IMPORTANT INFO: You must partition the disk drives after

changing the storage policy conﬁguration. See section 3.4. Format-

ting and Partitioning.

IMPORTANT INFO: Changing the RAID mode or encryption con-

ﬁguration destroys data stored on the LaCie 4big. If you have saved

data on the drives, back it up before following these steps.

IMPORTANT NOTE: If you have encrypted your 4big, changing

the RAID mode will not change the encryption conﬁguration (includ-

ing login name and password) but will erase the encrypted data.

off

auto

off

auto

Fig. 14

Bekijk gratis de handleiding van LaCie 4big Quadra Enterprise Class, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.