La Germania TUS90IND60LAX handleiding
Handleiding
Je bekijkt pagina 10 van 28
10
You now have 3 seconds to select the heating setting of your choice. Once a setting between 1 and 9 has been
selected, "A" and the chosen setting will flash in alternation on the display. '
While the heating accelerator is in operation, the heating level can be increased at any time. The "full power" time
will be modified accordingly. If the power is reduced by turning the knob anticlockwise, option "A" is automatically
deactivated.
.
Power Function
The power function allows the user to operate each heating zone continuously at the maximum power for a time of
no more than 10 minutes. This function can be used, for example, to bring a large amount of water to the boil in a
hurry, or to turn up the heat under meat.
Turn the knob clockwise and set heating level 9, then use the knob to set the "P" position and release it. "P"
appears on the corresponding zone display.
After 10 minutes, the power is reduced automatically, the knob returns to the 9 setting and the "P" disappears.
However, the power function can be turned off at any time by reducing the heating level. .
When the power function is selected for one heating zone (e.g. the left front zone), the power absorbed by the
second zone (Ieft rear zone) might be reduced to supply the maximum available energy to the first zone.
Consequently, the power function takes priority over the heating accelerator.
If a pan is removed from the cooking zone while the power function is on, the function is switched off.
Bridge Function
2 cooking zones bridged behave like one cooking zone and can also be controlled like only one. For this range, the
bridge can only be activated vertically on the octa inductors. To activate it, turn both concerned knobs to the right
until the stop during 2 s. On the rear display you will have the bridge indication and on the front display you choose
your power level.
Time limitation system
Power level Operating time limitation in Min.
1 520
2 402
3 318
4 260
5 212
6 170
7 139
8 113
9 90
Limitation power: (only for induction hob)
1. Make sure that all knobs are on position ‘0’
2. Turn the knob front left and front right simultaneously to leftoverwind positon and hold for 3 s. then release
both knobs.
. the two upper displays now show the power per phase.
. the two lower display show the number of phase(e.g. “2 P” for 2-phase connection)
3. Turn the knob front right X1 to left overwind position to toggle through the offered settings.
4. Perform no action for 10 s. => the setting which is displayed will be saved permanently. The cooktop goes
to OFF mode and can be operated regularly.
Configuration of
power
mana
g
ement
Power supply
per phase [A]
Number of
phases
Voltage [V] Power limit
per phase
1 29,13
A
1 230 V 6700 W
2 13,00
A
2 230 V 3000 W
3 26,00
A
1 230 V 6000 W
4 23,91
A
1 230 V 5500 W
5 10,43
A
2 230 V 2400 W
6 18,26
A
1 230 V 4200 W
7 16,00
A
1 230 V 3700 W
8 10,43
A
1 230 V 2400 W
9 5,22
A
1 230 V 1200 W
Bekijk gratis de handleiding van La Germania TUS90IND60LAX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | La Germania |
| Model | TUS90IND60LAX |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 8778 MB |
