Handleiding
Je bekijkt pagina 10 van 25
KWIKOOL KIBXX II/KWIBXX II ICEBERG SERIES SYSTEMS
10
SECTION IV UNIT OPERATION
A STARTUP
Apply Electrical Power
Once power is engaged by plugging in the system and/or switching the breaker dedicated to the system
on, the Iceberg display will come on and show the current room temperature. The Iceberg Series
System is factory set to OFF and the fan is set to the default position. A 2.5-minute time delay starts
when power is engaged. If nothing appears on the display, refer to the Troubleshooting Guide section
of this manual.
B TOUCH SCREEN PANEL
The touch screen display shows the current operational status of the Iceberg Series System.
ICON Descriptions
ICON
NAME
FUNCTION
ON/OFF
Turns Iceberg System On or Off
MODE
Allows user to choose Cool or Fan, as the desired operation
COOL
Flashes when Compressor is running. Stays steady when room
temperature is equal or lower than set point or when system is timing
out.
FAN
Indicates fan is in use for air circulation without compressor operation.
FAN
Fan Speed Control
Used to adjust fan speed through up to 3 settings and AUTO FAN
depending on model of system
Up/Down Selector
Raises or lowers desired set point temperature.
SETTINGS
Pressing for 3 seconds allows access to User Operating Parameter List.
Bekijk gratis de handleiding van KwiKool KIB3021-2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | KwiKool |
| Model | KIB3021-2 |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 3684 MB |
