KStrong Wrangler UFA40010 handleiding
Handleiding
Je bekijkt pagina 5 van 8
IMPORTANT INFORMATION
The Horizontal Anchor Line and the anchor points need to be above the user's head, Horizontal anchor line is intended for use on span
upto 100 ft, for a fall of up to 4 users, with anchor line fitted on spans of 15 ft to 100 ft, the typical peak line deflection from the original
position are stated in table above.
MAINTENANCE, CLEANING AND STORAGE
Repairs to this product can only be made by a by a competent person or an entity authorized by manufacturer. If a this product fails
inspection in any way, immediately remove it from service, and contact manufacturer to inquire about its return or repair.
Cleaning after use is important for maintaining the safety and longevity of this product .
Remove all dirt, corrosives, and contaminants from this product before and after each use. If this product cannot be cleaned with plain
water, use mild soap and water, then rinse and wipe dry. NEVER clean this product with corrosive substances.
When not in use, store equipment where it will not be affected by heat, light, excessive moisture, chemicals, or other degrading
elements.
INSPECTION
Ø KEEP INSTRUCTIONS AVAILABLE FOR REFERENCE. Record Date of First Use
Ø Prior to EACH use, inspect this product for deficiencies, including, but not limited to, corrosion, deformation, pits, burrs,
rough surfaces, sharp edges, cracking, rust, paint buildup, excessive heating, alteration, broken stitching, fraying, bird-
caging, and missing or illegible labels. IMMEDIATELY remove this product from service if defects or damage are found, or
if exposed to forces of fall arrest.
Ø Ensure that applicable work area is free of all damage, including, but not limited to, debris, rot, rust, decay, cracking, and
hazardous materials. Ensure that selected work area will support the application-specific minimum loads set forth in this
instruction manual. Work area MUST be stable.
Ø At least every 6 months, a Competent Person other than the user must inspect this product. Competent Person
inspections MUST be recorded in inspection log in instruction manual and on equipment inspection grid label.
The Competent Person must sign their initials in the box corresponding to the month and year the inspection took
place.
Ø During inspection, consider all applications and hazards this product has been subjected to.
Before Fall After Fall
Anchorage
Allowance
Static line
deflection
Length
of Lanyard
Energy
Absorber
Extension
Height of worker
Safety Clearance
Refer
Deflection Chart
6.56 ft.
1.00m
1.80m
1.00m
Fig. 10
Table
Span Length
Users
1 2
3
4
3.87
4.30
3.87 3.87
4.33 4.82
4.36 4.36
5.28
5.91
5.31 5.31
5.74
6.43
5.81 5.81
6.69
7.51
6.76 6.76
7.15
8.04
7.25 7.25
8.07
9.09
8.20 8.20
8.56
9.65
8.69 8.69
9.48
10.70
9.65 9.65
9.94
11.22
10.14 10.14
10.89
12.30
11.12 11.12
11.35
12.83
11.58 11.58
12.30
13.95
12.56 12.56
12.76
14.44
13.02 13.02
13.68
15.49
14.01 14.01
14.14
16.01
14.50 14.50
15.06
17.06
15.49 15.49
15.52 17.59 15.98 15.98
Deflection Chart
15 ft.
20 ft.
25 ft.
30 ft.
35 ft.
40 ft.
45 ft.
50 ft.
55 ft.
60 ft.
65 ft.
70 ft.
75 ft.
80 ft.
85 ft.
90 ft.
95 ft.
100 ft.
4
Bekijk gratis de handleiding van KStrong Wrangler UFA40010, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | KStrong |
| Model | Wrangler UFA40010 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 853 MB |
