Krups Semi Pro TR5223 handleiding
Handleiding
Je bekijkt pagina 12 van 52
10
– Select the desired thickness by turning the button (F).
Setting slide thickness
V - CLEANING
VI - WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK?
– Refer to section III “Before first use”
– Check electrical connection and the start-up procedure.
– The appliance cannot operate without the platform (G).
What if your appliance still fails to work?
– If you have any product problems or queries, please contact our Customer Relations Team first for expert help and
advice:
HELPLINE:
0845 602 1454 – UK
(01) 4751947 – Ireland
or consult our website - www.krups.co.uk
– Pull the safety button (B) and while holding it, press the On/Off button
(A) with your left hand.
– As soon as the blade starts to turn, release the safety button (B) and
hold the On/Off button (A) down.
– Push the trolley (D) with your right hand to start slicing.
– As soon as the On/Off button (A) is released, the appliance will stop
automatically. The slicer will then only start again when you activate the
safety button (B) followed by the On/Off button (A).
– This is a safety device that prevents involuntary start-up of the appliance,
especially by children.
– After use, turn the slice thickness setting button (F) to minimum.
A
B
Starting
VII - ELECTRICAL OR ELECTRONIC PRODUCT AT END OF SERVICE LIFE
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a local civic waste collection point.
Environmentprotectionfirst!
Bekijk gratis de handleiding van Krups Semi Pro TR5223, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Krups |
| Model | Semi Pro TR5223 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6936 MB |
