Krups Aroma XL KT8428 handleiding
Handleiding
Je bekijkt pagina 10 van 93
1716
ENGLISH
COFFEE PREPARATION WITH COFFEE BEANS
1. Fill coffee bean box (B)with coffee beans.
Beware! Do not use too oily beans which may damage your appliance.
2. Fill the water tank (F) that corresponds to the number of coffee cups you want to drink.
This is a removable water tank that you can take it under water tap to fill water.
3. Open the filter holder (I).
4. Insert the filter paper, put filter ring(I
1
) on the top (filter ring(I
1
) is a part of this product,
please do not put it in the bin).
5. Close the filter holder (I).
6. Place carafe (J) on the heating plate(K).
7. Set desired grinding fineness using Grinding adjustment knob (C). Grind your coffee
from coarse to fine by using Grinding adjustment knob (C) from big point to small point.
8. Set the desired number of cups using
(H2). (G3) displays the number chosen.
9. Set coffee strength using
(H3). (G2) displays the strength chosen.
10. Press (H6) to start the coffee preparation cycle:
–
(H7) lights up with orange light
–
(G2) and (G3) keep lighting
– Grinder runs, then hot water goes across the ground coffee freshly prepared by the
grinder.
11. When the coffee cycle is finished:
– The appliance beeps 6 times.
–
(G5) lights up, the appliance enters keep-warm process automatically.
NOTE: no keep-warm process for product with thermal carafe.
COFFEE PREPARATION WITH PRE-GROUND COFFEE
1. Open the filter holder(I).
2. Fill the water tank (F) that corresponds to the number of coffee cups you want to drink.
The water tank can be removed.
3. Insert the filter paper, put filter ring(I
1
) on the top (filter ring(I
1
) is the accessory of this
product, please do not put it in the bin).
4. Put desired quantity of coffee grounds into the filter. One spoon is for one cup of coffee.
5. Close the filter holder(I).
Beware! Do not put coffee grounds in the Coffee bean box(B), only in the paper filter, or
it may damage your appliance.
6. Place carafe (J) on the heating plate(K).
7. Press the
(H4), (G4) appears on the display.
8. Set coffee strength using
(H3). (G2) displays the strength chosen. 1 bean for
‘Regular coffee’ while 2 beans for ‘Aroma coffee’.
9. Press
(H6) to start the coffee preparation cycle:
–
(H7) lights up with orange light
–
(G2) (G3) and (G4) keep lighting
– Hot water goes across the ground coffee freshly prepared.
10. When the coffee cycle is finished:
– The appliance beeps 6 times.
– Keep-warm indicator (G5) lights up, the appliance enters keep-warm process
automatically.
NOTE: No keep warm process for product with thermal carafe.
COFFEE PREPARATION WITH DELAYED-START
1. Fill the water tank (F) that corresponds to the number of coffee cups you want to drink.
2. Open the filter holder.
3. Insert the filter paper, put filter ring (I
1
) on the top (filter ring(I
1
) is the accessory of this
product, please do not put it in the bin).
4. Close the filter holder.
5. Set grinder parameters or Put desired quantity of coffee grounds into the filter.
6. Place carafe (J) on the heating plate (K).
7. Press the
(H8), (G6) appears on the display. Time display (G1) will show 12:00,
means enter-into the delayed start state. It will exit the delayed start setting state if not
press the button within 5 seconds.
8. Set the time using
(H10) to select hour, hour value is displayed on screen (Holding
down the button will increase the hour value progressively faster). Press
(H11) to
select minute in the same way. It will exit the clock setting state (setting time has been
saved) if the button is not pressed within 5 seconds. When Time display (G1) shows the
current time and The
(G6) keeps on the screen, delayed- start activation is done.
9. In the delayed start setting
(G6) lights), short press (H8) to exit the delayed-start
setting state, the (G6) disappears, and the Time display (G1) shows Current Time.
10. Once the delayed start is reached, the coffee preparation cycle starts automatically:
–
(G6) disappears.
–
(H7) lights up with orange light.
– Hot water flows through the ground coffee into the carafe.
11. When the coffee cycle is finished:
– The appliance beeps 6 times.
–
(G5) lights up, the appliance enters keep-warm process automatically.
NOTE: no keep-warm process for product with thermal carafe.
KEEP-WARM SETTING
1. After pressing (H1), (H1) lights up with full light.
2. Hold down (H11) for 2 seconds, Time display (G1) changes to ‘00’.
3. Multi-press (H11) to chose keep-warm duration.
4. Setting increment at 30 interval: 0min-30min-60min-90min-120min
5. It will exit if the button is not pressed within 5 seconds, Time display (G1) shows the
current time.
NOTE: product with thermal carafe has no keep warm setting.
STANDBY MODE
1. If no operation on the machine for 10 minutes, the appliance enters Standby mode for
energy saving, all display switch off.
2. To wake up the machine : Press any button on the front panel
– The Time (24h format) is displayed.
– The machine enters “Ready to use” status for coffee preparation.
Bekijk gratis de handleiding van Krups Aroma XL KT8428, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Krups |
| Model | Aroma XL KT8428 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7878 MB |
