Kramer VS-8FDxl handleiding
Handleiding
Je bekijkt pagina 9 van 56
Kramer Electronics Ltd.
VS-8FDxl - Connecting the VS-8FDxl
7
Connecting the VS-8FDxl
Always switch off the power to each device before connecting it to your VS-8FDxl. After
connecting your VS-8FDxl, connect its power and then switch on the power to each device.
Although this connecting example shows only several inputs and outputs that are connected,
you can connect all the inputs and outputs simultaneously.
To connect the VS-8FDxl as illustrated in the example in Figure 3:
This connection example describes the VS-8FDxl default setup: a 4x4 switcher in the 1080p
mode. Other setups can include a range of 7:1 to 1x7 switching setups and in the 4K/30
mode, a range of 3:1 to 1x3 switching setups.
1. Connect up to four SDI video sources to the PORT BNC connectors (1 to 4) . For
example, connect:
An SDI camera to PORT 1.
A Kramer FC-113 HDMI to SD/HD-SDI Converter to PORT 4.
2. Connect up to four SDI video PORT BNC connectors (5 to 8) to up to four acceptors.
For example, connect:
PORT 5 to an SDI display.
PORT 8 to an SDI display.
3. Connect the power cord .
We recommend that you use only the power cord that is supplied with this machine.
4. If required, connect:
The ETHERNET port .
The RS-232 3-pin terminal block connector to a control device.
Figure 3: Connecting to the VS-8FDxl Rear Panel
Bekijk gratis de handleiding van Kramer VS-8FDxl, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kramer |
| Model | VS-8FDxl |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7108 MB |
