Kramer VS-8FDxl handleiding
Handleiding
Je bekijkt pagina 24 van 56
Kramer Electronics Ltd.
VS-8FDxl - Using the Embedded Web Pages
22
2. Set DHCP ON or OFF.
3. If DHCP is OFF, change any of the parameters (IP Address, Netmask and/or Gateway).
4 . Click Set.
Note that:
After changing the IP number, reload the web page with the new IP address.
If DHCP is ON, reload the web page with the new IP address.
Loading and Saving a Preset
You can save up to 8 presets and load them onto the VS-8FDxl, see Saving and Loading a
Setup on page 12.
To save the current switching configuration to a preset:
1. In the Navigation pane, click Device Settings. The Device Settings page appears
(Figure 15).
2. Click the Preset drop-down box and select a Preset number (Preset 1 to Preset 8).
3. Click Save.
The current configuration is stored in the selected preset.
To load the current switching configuration to the device:
1. In the Navigation pane, click Device Settings. The Device Settings page appears
(Figure 15).
2. Click the Preset drop-down box and select the Preset number (Preset 1 to Preset 8) with
the desired configuration.
3. Click Load.
The current configuration is uploaded to VS-8FDxl.
4. If desired, check Locked to lock the preset.
The preset is locked and cannot be changed with a different configuration via the SAVE
front panel button. When trying to save a different configuration to the locked preset, the
following message appears on the display:
“Failed saving read-only preset”.
You can only save a new configuration to this preset by unlocking the configuration via the
web pages.
Bekijk gratis de handleiding van Kramer VS-8FDxl, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kramer |
| Model | VS-8FDxl |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7108 MB |
