Kramer VS-84HN handleiding
Handleiding
Je bekijkt pagina 18 van 49
VS-84HN - Operating the VS-84HN 8x4 HDMI Matrix Switcher
15
To store a preset (for example, to preset 10):
1. Configure the switching as required for the preset (for example, Input 4 to
Output 3).
2. Press the STO button.
The STO button flashes.
3. Select an OUT or IN SELECT button to store the device setting (for
example, IN 6 for preset 10).
4. Press the STO button to store the current setup.
You have to press the STO button within 10 seconds or the procedure automatically
times out.
To recall a preset (for example, preset 10):
1. Press the RCL button.
The RCL button flashes.
2. Press the relevant OUT or IN button that stored the preset (for example, IN
6/preset 10).
3. Press the RCL button to recall the stored preset.
The RCL button stops flashing.
6.4 Changing the Port Switching Speed
The switching speed can be set per port to any of the following:
• 3—Normal (default)
• 2—Fast
• 1—Extra fast
To change the port switching speed:
1. Ensure that the device is in normal switching mode, (that is, not Store,
Recall or EDID mode).
2. Press the RCL and EDID buttons at the same time.
The RCL and EDID buttons flash, and the display indicates the switching
speed mode of each port.
IN 1, IN 2 and IN 3 are illuminated (red).
Bekijk gratis de handleiding van Kramer VS-84HN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kramer |
| Model | VS-84HN |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5553 MB |
