Kramer VS-84HN handleiding
Handleiding
Je bekijkt pagina 15 van 49
12 VS-84HN - Operating the VS-84HN 8x4 HDMI Matrix Switcher
6 Operating the VS-84HN 8x4 HDMI Matrix
Switcher
This section describes:
• Switching an input to an output (see Section 6.1
)
• Acquiring the EDID (see Section 6.2)
• Storing and recalling switch settings (see Section 6.3)
• Changing the port switching speed (see Section 6.4)
• Set HDCP on or off (see Section 6.5)
• Resetting the VS-84HN IP parameters (see Section 6.6)
• Switching Between Protocol 2000 and Protocol 3000 (see Section 6.7)
• Connecting to the VS-84HN via RS-232 (see Section 6.8)
• Connecting to the VS-84HN via Ethernet (see Section 6.9)
• Upgrading the firmware (see Section 6.10)
6.1 Switching an Input to an Output
To switch an input to an output:
• Press an output button followed by an input button to switch the selected
input to the selected output
6.2 Acquiring the EDID
You can acquire the EDID from any of the following:
• One output set to one or more of the eight inputs (see Section 6.2.1
)
• Different outputs set to different inputs (see Section 6.2.2)
• The default EDID (see Section 6.2.3)
Note: Attempting to acquire the EDID from an output that does not have a display
device connected to it results in the default EDID being acquired.
Bekijk gratis de handleiding van Kramer VS-84HN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kramer |
| Model | VS-84HN |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5553 MB |
