Kramer VS-6464DN-EM handleiding
Handleiding
Je bekijkt pagina 6 van 94
Kramer Electronics Ltd.
VS-6464DN-EM – Introduction
4
About Power Connect™
The Power Connect™ feature here means that the VS-6464DN-EM can supply power to the
TP transmitters and receivers (for example, the TP-573 and TP-574) as long as the devices
are within 90m (270ft) of each other. The Power Connect™ feature applies as long as the
cable can carry power and the distance does not exceed 90m on standard CAT 5 cable. For
longer distances, a heavier gauge cable should be used (a TP cable is still suitable for the
video/audio transmission, but not for feeding the power at these distances).
Overview
The Kramer VS-6464DN-EM is a high performance managed matrix switcher chassis for AV
signals. The unit is modular and populated from 8 x 8 to 64 x 64 ports in increments of eight
inputs and/or eight outputs. The unit supports various signals, depending on the type of cards
installed, and includes two power supplies with an optional third for redundancy and a
controller and testing module that can monitor and test any input or output in the matrix. It
features a very high bandwidth of up to 3.4Gbps (for the chassis only, effective bandwidth of
the system depends on the input / output cards, see Using the Input / Output Cards
on page 33) that ensures transparent performance even in the most critical applications. The
cards re-clock and equalize the signals and the chassis can route any or all inputs to any or
all outputs simultaneously.
The VS-6464DN-EM is highly configurable – you can add or remove inputs and outputs
independently in groups of eight and mix different types of input/output cards in the same
chassis. For example, you can configure a device as an 8 x 24 or a 64 x 8 matrix switcher to
exactly suit your needs.
The VS-6464DN-EM features:
• Full 64 x 64 non-blocking matrix array to switch any of the 64 input digital signals to any
or all of the 64 outputs (see Connecting the VS-6464DN-EM on page 11).
• Easy access to 60 pre-set memory locations for quick access to user-defined setups.
• Fast switching on outputs to reduce or remove switching delay.
• Support for redundant, hot swappable power supplies.
• Simple firmware upgrade of compatible cards (see Upgrading VS-6464DN-EM and Input
/ Output Card Firmware on page 53).
• Seamless integration with Kramer Network for switching, card status, port status,
firmware upgrades (of compatible cards), and more.
• A 40 character by 2 line LCD that shows the operational status or the configuration
menu.
• A lock function to prevent tampering with the front panel.
• A default EDID (Extended Display Identification Data) for each input.
• EDID Capture – Copies and stores the EDID from a display device.
• Non-volatile EDID storage.
Bekijk gratis de handleiding van Kramer VS-6464DN-EM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kramer |
| Model | VS-6464DN-EM |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12859 MB |
