Kramer VS-44HDxl handleiding
Handleiding
Je bekijkt pagina 18 van 32
Connecting Your VS-44HDxl 3G HD/SD-SDI 4x4 Matrix Switcher
15
6.5 Controlling via the RS-485 Port
To cascade up to eight individual VS-44HDxl units
1
, via RS-485 (with control
via a Master Programmable Remote Control system such as the Kramer
RC-3000), as Figure 6 illustrates, do the following:
1. Connect the “A” (+) and “B” (-) PINS on the RS-485 terminal block port
of the RC-3000 to the “A” (+) and “B” (-) PINS, respectively, on each of
the eight VS-44HDxl units. (If using shielded twisted pair cable, the
shield is usually connected to the “G” (Ground) PIN of the first unit).
2. Set the first VS-44HDxl unit as MACHINE # 1 and the following seven
VS-44HDxl units as MACHINE # 2 to MACHINE # 8, according to
Table 3.
MACHINE # 1
MACHINE # 8
KEYBOARD EXTENSION
REMOTE CONTACT
RS-485 RS-232 IN
RS-232 OUT
12 VDC
1
2
1 2
3 4 5 6 7 8 G4 6 8 103 5 7 9 11 12 14 16
OUT
13 15
IN
RC-3000
RS-485 PINOUT
B
A
_
+
Figure 6: Controlling via RS-485 (for example, using an RC-3000)
6.6 Factory Reset
Press and hold the input buttons 1, 2 and 3 simultaneously for 3 seconds until the
three buttons flash to reset the machine to its default values.
1 Regular and/or dual-link units
Bekijk gratis de handleiding van Kramer VS-44HDxl, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kramer |
| Model | VS-44HDxl |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3315 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart, zilver |
| Gewicht | 2600 g |
| Gebruikershandleiding | Ja |
| Stroomvoorziening | 100−240VAC, 50/60Hz |
| LED-indicatoren | Ja |
