Kramer VS-42HDCP handleiding
Handleiding
Je bekijkt pagina 7 van 48
4
VS-42HDCP - Overview
3 Overview
The VS-42HDCP is a high quality 4x2 DVI matrix switcher. It reclocks and
equalizes the signals and can route any of the four DVI/HDMI (over DVI-D
connector) inputs to one or both DVI/HDMI outputs simultaneously.
DVI-D (Digital). Note that only the digital signal (DVI D) is available on the DVI connector.
In particular, the VS-42HDCP features:
• Up to 6.75Gbps data rate (2.25Gbps per graphics channel)
Suitable for resolutions up to UXGA and 1080p at 60Hz
• Support for HDCP (High Definition Digital Content Protection)
• HDMI Support – HDMI (3D, Deep Color, x.v.Color™, Lip Sync)
• 3D pass-through
• Support for up to 7.1 multi-channel audio
• I-EDIDPro™ Kramer Intelligent EDID Processing™ – Intelligent EDID
handling and processing algorithm ensures Plug and Play operation for
HDMI systems
• Kramer reKlocking™ and Equalization Technology that rebuilds the digital
signal to travel longer distances
• A LOCK button to prevent unwanted tampering with the buttons on the front
panel
• Support for Kramer Protocol 2000 and Protocol 3000
You can control the VS-42HDCP using the front panel buttons or remotely via:
• RS-232 serial commands transmitted by a touch screen system, PC or other
serial controller
• The Kramer RC-IR3 infrared remote control transmitter
• The infrared remote extension cable transmitter (optional), see Section 7.3
• The Ethernet port
Bekijk gratis de handleiding van Kramer VS-42HDCP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kramer |
| Model | VS-42HDCP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5421 MB |
