Kramer VP-16x18AK handleiding
Handleiding
Je bekijkt pagina 20 van 60
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting and Configuring the VP-16x18AK
16
6.5 Connecting to the VP-16x18AK via the Ethernet Port
You can connect the VP-16x18AK via Ethernet using either of the
following methods:
Direct connection to the PC using a crossover cable (see
Section 6.5.1)
Connection via a network hub, switch or router using a
straight-through cable (see Section 6.5.2)
Note: The following instructions are valid only if your PC uses a fixed IP
address. If your PC receives an IP address from a DHCP server, consult
your IT department regarding a suitable IP address.
6.5.1 Connecting Directly to the Ethernet Port
You can connect the Ethernet port of the VP-16x18AK to the Ethernet port
on your PC via a crossover cable with RJ-45 connectors.
This type of connection is recommended for identification of the factory
default IP Address of the VP-16x18AK during the initial configuration
To connect the VP-16x18AK directly to a PC using a crossover cable:
1. Using a crossover cable, connect the VP-16x18AK to the PC via the
Ethernet port on both units.
2. On the PC, click Start > Control Panel.
3. Double-click Network Connections.
4. Right-click, and from the menu select Properties.
The Local Area Connection Properties window appears.
5. Select Internet Protocol (TCP/IP) (see Figure 6).
Bekijk gratis de handleiding van Kramer VP-16x18AK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kramer |
| Model | VP-16x18AK |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9636 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht | 4400 g |
| LED-indicatoren | Ja |
| AC-adapter ingangsspanning | 100 - 240 V |
| Meegeleverde kabels | AC |
