Kramer VP-1608 handleiding
Handleiding
Je bekijkt pagina 33 van 46
VP-1608 - Flash Memory Upgrade 29
9. Click Run. After each stage of the operation is completed, the check-box for
that stage becomes colored green (see also the blue progress indicator on
the status bar).
When the operation is completed, all 4 check-boxes are colored green and
the status bar message: Memory Verify Pass appears:
If an error message: “Not Finished” shows, click Run again.
Figure 19: Atmel – Flip Window (Operation Completed)
10. Close the “Atmel – Flip” window.
11. Disconnect the power on the VP-1608.
12. Set both the underside switches: Flash Program switch 1 and Flash Program
switch 2 (see
Figure 3) to Normal.
13. Connect the power on the VP-1608.
Upon initialization, the new VP-1608 software version shows in the INPUT
STATUS 7-segment Display.
Bekijk gratis de handleiding van Kramer VP-1608, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kramer |
| Model | VP-1608 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7161 MB |
Caratteristiche Prodotto
| Kleur van het product | Black, Grey |
| Gewicht | 5500 g |
| AC-adapterfrequentie | 50/60 Hz |
| RS-232 port | 1 |
| BNC output ports | 24 |
