Kramer TP-873XR handleiding
Handleiding
Je bekijkt pagina 9 van 14
Kramer Electronics Ltd.
TP-873XR / TP-874XR – Connecting TP-873XR/TP-874XR
7
Connecting TP-873XR/TP-874XR
Always switch off the power to each device before connecting it to your TP-
873XR/TP-874XR. After connecting your TP-873XR/TP-874XR, connect its power and then
switch on the power to each device.
Figure 3: Connecting to the TP-873XR/TP-874XR Rear Panel
To connect the TP-873XR/TP-874XR as illustrated in the example in Figure 3:
1. On TP-873XR, connect an HDMI source (for example, a 4K Blu-ray player) to the
HDMI™ IN connector .
2. On TP-874XR, connect the HDMI™ OUT connector
to an acceptor (for example, a
4K display).
3. Connect the TP-873XR DGKAT-2 OUT RJ-45 connector to the TP-874XR DGKAT-2
IN RJ-45 connector .
4. Connect IR extension:
▪ On TP-873XR connect the IR 3.5mm mini jack
to an IR emitter and connect it to
the Blu-ray IR sensor.
▪ On TP-874XR connect the IR 3.5mm mini jack to an IR sensor.
Point the Blu-ray IR remote control transmitter to that IR sensor to send commands
to the Blu-ray player via DGKat 2.0.
5. Connect RS-232 extension:
▪ On TP-873XR connect a controller (for example, SL-240C room controller) to the
RS-232 3-pin terminal block connector .
▪ On TP-874XR connect the RS-232 3-pin terminal block connector to the display.
4
13
5
14
7
16
8
17
Bekijk gratis de handleiding van Kramer TP-873XR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kramer |
| Model | TP-873XR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2066 MB |
