Kramer TP-873XR handleiding
Handleiding
Je bekijkt pagina 11 van 14
Kramer Electronics Ltd.
TP-873XR / TP-874XR – Connecting TP-873XR/TP-874XR
9
Setting the DIP-Switches
The DIP-switches are used to:
• Set the compression levels.
• Determine IR frequency mode.
• Enable RS-232 signal extension.
• Upgrade the firmware.
Figure 4: Setup DIP-Switches
All the DIP-switches are set to OFF (up) by default.
#
Feature
DIP-switch Settings
1
Compression Options
OFF (up) – Standard compression level.
ON (down) – High compression level for additional range extension.
2
IR Frequency Mode
OFF (up) – Frequency is 38kHz.
ON (down) – Wide-range modulated IR frequency pass-through.
3
RS-232 Mode
OFF (up) – Serial extension.
ON (down) – Serial device service mode.
4
FW Upgrade
OFF (up) – Normal operation mode.
ON (down) – FW upgrade mode (DIP-switch 3 needs to be ON).
Bekijk gratis de handleiding van Kramer TP-873XR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kramer |
| Model | TP-873XR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2066 MB |
