Kramer MTX3-88-HSA handleiding

77 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 35 van 77
Kramer Electronics Ltd.
MTX3-88-HSAUsing Embedded Web Pages
33
Auto-sync off: Select to enable Auto-sync Off.
o If disabled, the device will shut down the HDMI output +5v when there is no
active signal to the output.
o If enabled, the device will shut down the HDMI output +5v based on the value
entered in the Set the Auto-sync off time (detailed below).
o Set the Auto-sync off time value:” Enter a value anywhere from 5 900
seconds.
3. Click Save to save all settings.
A screen appears asking if you want to apply the changes to all outputs.
o Click Save to apply changes to all outputs.
o Click Cancel to apply changes to the specific output.
Figure 29: Save Changes to AV Settings
Audio output settings are configured.
Audio Settings
Configuring Audio Input Settings
To configure Audio input settings:
1. Navigate to the AV Settings>Audio tab (see Navigating to the AV Settings Tab on Page
30).
6. In the left-hand pane, select the relevant Input (Input1-4).
Figure 30: Audio Input Settings
7. For each input set the following parameters:
If on an output port the +5V is shut down, a monitor connected or
disconnected from the output cannot be indicated correctly and
immediately on the keyboard.

Bekijk gratis de handleiding van Kramer MTX3-88-HSA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkKramer
ModelMTX3-88-HSA
CategorieNiet gecategoriseerd
TaalNederlands
Grootte11584 MB