Kramer MTX3-88-HSA handleiding
Handleiding
Je bekijkt pagina 12 van 77
Kramer Electronics Ltd.
MTX3-88-HSA – Operating MTX3-88-HSA via Front Panel Buttons
10
Operating MTX3-88-HSA via Front
Panel Buttons
Press the power switch to power the device. The device enters a self-checking state, and
then initialization begins.
During the 10-second initialization process, the:
• All of the keyboard indicators are fully illuminated for a short time.
• The RUN and STATUS LED indicator lights change from red to green.
• The indicator lights turn off.
Following initialization, the front panel buttons enter normal operation:
• The IN button indicator light indicates the active signal connected to the input.
• The OUT button indicator indicates that the receiver is connected to the output.
Following initialization, the front panel buttons enter normal operation:
• The IN button indicator light indicates the active signal connected to the input.
• The OUT button indicator indicates that the receiver is connected to the output.
In general, the front panel buttons indicate the device operation modes follows:
Button
LED
Status
Operation Mode
Press VIDEO
On
Pressing an output button will light the input which it is routed from.
Pressing a different input button will modify the routing. Video inputs
are switched to video outputs.
Press D-
AUDIO
On
Pressing an output will light the digital audio input which it is routed to.
Pressing a different input button will modify the routing of the digital
audio. Digital inputs (HDMI input audio) are switched to digital outputs
(HDMI output audio). If after pressing the output button, no input is lit
on, this indicates that an analog input audio is routed to this video
digital output.
Press twice
D-AUDIO
Flashing
Pressing an input button followed by an output button routes analog
Audio inputs and embeds : Analog audio inputs are switched to the
digital audio outputs (HDMI output audio).
A-AUDIO
On
Audio de-embedding: Digital audio outputs (HDMI input audio) are
switched to Analog audio outputs.
Press twice
A-AUDIO
Flashing
Pressing input button following output button routes Analog digital
audio inputs are switched to analog audio outputs.
VIDEO
On
Video and digital inputs (HDMI) are switched to video and digital audio
outputs (HDMI).
D-AUDIO
On
VIDEO
On
Video inputs (HDMI) are switched to video outputs and analog audio
inputs (AUDIO IN) are switched to digital audio outputs (HDMI).
A-AUDIO
On
Bekijk gratis de handleiding van Kramer MTX3-88-HSA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kramer |
| Model | MTX3-88-HSA |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11584 MB |
