Handleiding
Je bekijkt pagina 19 van 39
Kramer Electronics Ltd.
KT-2015 / KT-2015WM – Basic Settings of KT-2015 / KT-2015WM
19
Changing the Automated Firmware Update
KT-2015 / KT-2015WM arrive preset to check for firmware (touch panel OS) updates at midnight
every day. If an update is found, the device will download the update file and install it. If you prefer
to run manual updates, you must manually download the update file and then install it in the touch
panel.
Changing the time of the automated firmware check
1. If necessary, swipe up from the bottom of the screen to bring up the PIN entry pop-up and
enter the PIN (default 9428).
2. From the Home page, open the Settings screen .
3. Select Firmware update and then select Remote firmware upgrade URL.
Remote firmware upgrade URL is the site from which the firmware is downloaded.
The upgrade URL (case sensitive):
https://cdn.kramerav.com/web/apk/transformer-Kramer-AndroidR.xml
Figure 7: The Firmware update page
4. A pop-up opens, inviting you to set the check time:
Figure 8: The Remote firmware upgrade URL page
5. To change the time that the system checks for updates, press Set check time and select a
new time.
6. Press OK to close the window and then press SET.
Changing (or clearing) the URL will disable the updates.
Bekijk gratis de handleiding van Kramer KT-2015WM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kramer |
| Model | KT-2015WM |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 6091 MB |
