Kramer KAC-CAM-50M handleiding
Handleiding
Je bekijkt pagina 9 van 15
9 | P a g e
Application
Wireless Remote Controller
Keys Instructions
1. SET: Use in combination with other keys to
confirm actions).
2. Standby: Press for the device to enter standby
mode; press again for the device to redisplay
the picture.
3. CAMERA SELECT: Select the camera to
control.
4. Number keys: Set or call 0-9 presets.
5. FOCUS (unsupported)
▪ + Focus in
▪ - Focus out
6. AUTO (unsupported)
7. MANUAL (unsupported)
8. ZOOM
▪ Press + to zoom in
▪ Press – to zoom out
9. SET PRESET | CLEAR PRESET
▪ Set Preset: Press and then press a
number key (0-9) to set a position.
Note that 10 presets can be set using
the RC.
▪ Clear Preset: Press and then press the
number key (0-9) to clear a preset.
▪ To clear all presets: Press the # key
three consecutive times (see Key
Combinations below for other possible
key combinations)
10. Pan/Tilt
▪ Up: Long-press ↑; release to stop
▪ Down: Long-press ↓; release to stop
▪ Left: Long-press ←; release to stop
▪ Right: Long-press →; release to stop
▪ HOME: Press for the camera lens to
return to the middle position, or to
enter the next menu.
11. BLC ON/OFF: Press to switch the back light
compensation on or off.
12. MENU
Press to open or close the On-Screen
Display (OSD) menu or return to the
previous menu.
13. Setting Camera Address
▪ F1, F2, F3, F4. Press the following
sequence to set an address:
Bekijk gratis de handleiding van Kramer KAC-CAM-50M, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kramer |
| Model | KAC-CAM-50M |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2502 MB |
