Kramer FC-18 handleiding
Handleiding
Je bekijkt pagina 7 van 72
Kramer Electronics Ltd.
FC-18 – Defining FC-18 Display Controller
5
Figure 2: FC-18 Display Controller Rear Panel
#
Feature
Function
Ethernet RJ-45 Port
Connect to a PC via a LAN to control the device, send commands to the
display, or tunnel RS-232 data to the display. Also use for firmware
upgrade.
REMOTE 4-pin Terminal
Block Connector
Connect to contact closure switches (by momentary contact between the
desired pin and GND pin), see Connecting Remote Control Switches
on page 8.
TOGGLE – one button toggles between display ON and display OFF
(instead of using two separate buttons for ON and OFF). The button can
be set for edge triggering (momentary connection) or for level triggering
(constant contact connection), see Setting the Toggle Pin Function
on page 45.
ON – turns the display on.
OFF – turns the display off.
RS-232 3-pin Terminal
Block Connectors
(G, Rx, Tx)
Set the function of the RS-232 port via the webpages:
Connect to the display to send RS-232 commands to the display (default)
via web pages, for example.
OR
Connect to a PC or remote controller to control FC-18 (for example,
instructing it to send a CEC command to turn the display on or off).
Tx LED
Lights red when RS-232 port transmits data.
Rx LED
Lights green when RS-232 Port receives data.
HDMI™ OUT Connector
Connect to a CEC enabled HDMI acceptor.
5V DC Power Connector
Connect to the supplied power adapter.
8
9
10
11
12
13
Bekijk gratis de handleiding van Kramer FC-18, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kramer |
| Model | FC-18 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11429 MB |
