Kramer DSP-62-UC handleiding
Handleiding
Je bekijkt pagina 7 van 88
Kramer Electronics Ltd.
DSP-62-AEC, DSP-62-UC – Defining DSP-62-AEC, DSP-62-UC
5
Defining DSP-62-AEC, DSP-62-UC
This section defines DSP-62-AEC and DSP-62-UC front panels.
DSP-62-AEC, DSP-62-UC Front Panels
Figure 1: DSP-62-AEC Front Panel
Figure 2: DSP-62-UC Front Panel
#
Feature
Function
SETUP DIP-switches
For factory use only.
HDMI IN 1 Button
Press to select HDMI IN 1 input (on the front panel).
HDMI IN 2 Button
Press to select HDMI IN 2 input (on the rear panel).
AUDIO
LEDs
USB IN
Turns green when an audio signal is detected on the input (for example,
if DSP-62-AEC, DSP-62-UC operates as a speaker to a PC).
USB OUT
Turns green when an audio signal is detected on the output (for
example, when DSP-62-AEC, DSP-62-UC operates as a microphone for
a PC).
IN (1 to 5)
Turns green when a signal is present. Turns red when clipping is
detected. For IN 2 to IN 5, when connecting a microphone and setting to
Mic mode via the embedded webpages, turns blue.
OUT
Turns green when a signal is present. Turns red when clipping is
detected.
AUDIO IN 1 3.5mm Mini
Jack
Connect to an unbalanced stereo audio source.
USB Type B Bi-
Directional Host Port
Connect to an audio source or acceptor.
HDMI IN 1 Connector
Connect to an HDMI source.
LINK
Turns green when the HDBT is connected to a receiver.
ON LED
Turns green when the device is powered.
1
2
3
4
5
6
7
8
9
10
Bekijk gratis de handleiding van Kramer DSP-62-UC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kramer |
| Model | DSP-62-UC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14613 MB |
