Kramer Aspen 3232HD-3G handleiding
Handleiding
Je bekijkt pagina 16 van 70
SIERRA VIDEO
6
For Yosemite Video, Sequoia, 3RU RS-422 Port Router, & Sierra Pro series 32 use the
following pin-outs.
Aspen
RTR
2 RX
3 TX
3 TX
2 TX
5 GND
1,5 & 9 GND
For RS422 use the following pin-outs.
RS-422 Crossover
Aspen
RTR
1
Ground
1
Ground
2
Transmit (-)
8
Receive (-)
3
Receive (+)
7
Transmit (+)
4
Not used
4
Not used
5
Not used
5
Not used
6
Not used
6
Not used
7
Transmit (+)
3
Receive (+)
8
Receive (-)
2
Transmit (-)
9
Ground
9
Ground
Button Labelling
To avoid causing damage to your Aspen router or control panel, follow this procedure
when relabeling the front panel buttons:
1. Remove the front panel by undoing the 14 retaining screws at the top and bottom of
the router, using a crosshead screwdriver.
2. Gently remove the transparent button cap on the relevant button with your fingers.
Take care not to put undue pressure on the white button assembly.
3. Insert the label under the button cap.
4. Replace the button cap with the label onto button base.
5. Repeat this process for all the buttons you wish to relabel.
6. Replace the front panel by securing all 14 screws.
Bekijk gratis de handleiding van Kramer Aspen 3232HD-3G, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kramer |
| Model | Aspen 3232HD-3G |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10015 MB |
