Kramer 810 handleiding
Handleiding
Je bekijkt pagina 8 van 12
810 - Connecting the 810
5
4 Connecting the 810
Always switch off the power to each device before connecting it to your
810. After connecting your 810, connect its power and then switch on
the power to each device.
To connect the 810 as illustrated in the example in Figure 2:
1. Connect the composite video BNC OUT 1 connector to the composite
acceptor (for example, a video display).
2. Connect the composite video BNC OUT 2 connector to the composite
acceptor (for example, a composite video recorder).
3. Connect the s-Video (Y/C) 4P Y/C OUT connector to the s-Video (Y/C)
acceptor (for example, an s-Video display).
4. Connect the 3-wire cable to the detachable terminal block 1 kHz OUT
connector and to the audio input of the destination unit.
5. Connect the 12V DC power adapter to the power socket and connect the
adapter to the mains electricity.
Figure 2: Connecting the 810 Color Bar/Audio Generator
i
Bekijk gratis de handleiding van Kramer 810, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kramer |
| Model | 810 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1961 MB |
