Kramer 616R/T handleiding

2 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 2 van 2
Step 3: Connect the transmitter/receiver pair
Always switch OFF the power on each device before connecting it to your 616T/R.
1. Connect the power to the 616R.
2. Connect the LC fiber cables to the 616T and 616R modules.
3. Plug the 616T DVI connector directly to the DVI connector of the PC.
4. Plug the 616R DVI connector directly to the DVI connector of the display.
5. Connect the power to the PC and the display.
To achieve specified extension distances, use the recommended Kramer cables available at www.kramerav.com/product/616T/616R.
Using third-party cables may cause damage!
Step 4: Connecting Power
Connect the power cord to 616T/R and plug it into the mains electricity.
Safety Instructions (See www.kramerav.com for updated safety information)
Caution:
l
For products with relay terminals and GPI\O ports, please refer to the permitted rating for an external connection, located next to the
terminal or in the User Manual.
l
There are no operator serviceable parts inside the unit.
Warning:
l
Use only the power cord that is supplied with the unit.
l
Disconnect the power and unplug the unit from the wall before installing.

Bekijk gratis de handleiding van Kramer 616R/T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkKramer
Model616R/T
CategorieNiet gecategoriseerd
TaalNederlands
Grootte340 MB