Kogan SmarterHome KASHSAC80TA Handleiding (68 Pagina's)

Handleiding

19

2. Bending the connecting pipes with the port facing up as shown in the figure

3. Take off the plastic cover in the pipe ports and take off the protective cover on the

end of piping connectors.

4. Check whether there is any dirt or debris on the port of the connecting pipe and

make ensure the port is clean.

5. After aligning the centre, rotate the nut of the connecting pipe to tighten the nut

as tightly as possible by hand.

6. Use a torque wrench to tighten it according to the torque values (refer to the

torque requirements table).

7. Wrap the joint with the insulation pipe.

Cable outlet

Piping outlet

No

Yes

Note: For R32 refrigerant, the connector should be placed outdoors.

Bekijk gratis de handleiding van Kogan SmarterHome KASHSAC80TA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.