Kogan KAWWASHTL7A handleiding
Handleiding
Je bekijkt pagina 9 van 32
• Attach the curved end of the hose to the corresponding inlet valve of the washer.
• Tighten the coupling nuts securely by hand, as illustrated below.
• Tighten the nut by turning it clockwise while holding the hose. (To detach the water
supply hose, turn the nut anticlockwise after turning the tap off.)
• Turn on the taps and check for leaks. Tighten the coupling nuts firmly if there is any
leakage. If your water pressure is strong, close the water tap completely, then open
it slightly.
Important:
• Both the hot water and cold water hoses must be connected to your taps.
• Make sure your hot water from the tap is no hotter than 60°C.
CAUTION:
• When tightening the clamping nut, take care not to damage the water inlet valve
joint. Apply force evenly and do not twist the water inlet valve.
• Use only the new (supplied) hoses with your new appliance. Do not use a hose from
an existing machine or one that has been used previously.
• In the event that the hoses are too short for your set-up, please seek advice from
your local washing machine store to purchase a longer hose.
Nut
Nut
Water inlet valve
Bekijk gratis de handleiding van Kogan KAWWASHTL7A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kogan |
| Model | KAWWASHTL7A |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 2778 MB |
