Kogan KAWWASHTL7A handleiding
Handleiding
Je bekijkt pagina 8 van 32
Levelling the washer
• Install the washer on a stable and level surface, in a dry location, out of sunlight.
• If levelling is necessary, adjust the adjustable leg (at the front right side of the
machine), as illustrated, below. The maximum permissible inclination of the
supporting surface is 2 degrees.
CAUTION: Installing the washer on a carpeted floor may cause vibration issues. If
you must install it on carpet, make sure not to block any ventilation openings on
the bottom of the washer.
Connecting the water inlet hoses
Install the water inlet hoses to your hot and cold water taps, as described below.
• Check and ensure that the sealing washers are firmly in place.
• Attach the straight end of the hose to your water taps. Make sure to attach the hot
water supply hose (with RED markings) to the hot water tap and the cold water
supply hose (with BLUE markings) to the cold water tap.
• Tighten the coupling nuts securely by hand, as illustrated below (the sealing
washer is part of and located inside the tap end).
Base of the washer
Lock nut
Adjustable leg
Up
Down
Tighten
Loosen
Twist
Tap
Sealing washer
Tap end
Inlet hose
Bekijk gratis de handleiding van Kogan KAWWASHTL7A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kogan |
| Model | KAWWASHTL7A |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 2778 MB |
