Kogan KAABLGTBARD handleiding
Handleiding
Je bekijkt pagina 9 van 20
Set device in pairing mode
When the device is first turned on, it may automatically enter pairing mode (lightbars are
rapidly flashing red).
If not automatically in pairing mode when powered on, you can manually set the device in
pairing mode by pressing and holding the power button for 6 seconds until the lightbars
are rapidly flashing red.
Add device through network
1. Once registered, tap “Add Device” on the app’s home page, or the “+” in the upper
right corner, to add a new device through the network.
2. Select the product type from the list of options in the app (Lighting > Smart Light
strip).
3. Ensure that the device is in pairing mode, with the status indicator is blinking rapidly,
and tap “Next”.
4. Enter your Wi-Fi details. It is important that your SmarterHome™ device and the app
are connected to the same Wi-Fi network during setup.
Notes:
• The device and the app have to use the same Wi-Fi network.
• The device is only compatible with 2.4Ghz networks.
• Depending on the product, Steps 3 and 4 may be in opposite order.
Bekijk gratis de handleiding van Kogan KAABLGTBARD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kogan |
| Model | KAABLGTBARD |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 1772 MB |
