Koenic KVRWD 21624 handleiding
Handleiding
Je bekijkt pagina 13 van 56
13
English
Fig.
9
Empty the waste water tank if it is
filled up to the MAX mark.
Note: Clean the water tank every 7 days.
Remove any scale, deposits, or film that has
formed on the sides of the tank or on interior
surfaces, and wipe all surfaces dry.
Warning!
Micro-organisms that may be present in
the water or in the environment where the
appliance is used or stored, can grow in the
water reservoir.
Self-cleaning
After you have finished the cleaning process,
press the SELF CLEANING button approx.
3 seconds to start the self-cleaning process,
which may be completed in 0.5 minute.
Cleaning and care
Warning!
• When cleaning the product, never use
solvents or abrasive materials, hard
brushes, metallic or sharp objects.
Solvents are harmful to human health and
can attack plastic parts, while abrasive
cleaning mechanisms and tools may
scratch the surface(s).
• Never immerse any electrical parts of the
product in water or in other liquids during
cleaning. Never place it under running water.
Cleaning the waste water tank
Note: After cleaning, the machine shall be
placed on the storage base, but not any place
exposing to direct sunlight or moisture;
Fig.
10
Remove the waste water tank by
pushing down the tank release button
with the thumb and taking out the tank.
Fig.
11
Remove the upper cover including the
filter.
Fig.
12
Empty the tank and use the cleaning
brush to remove any deposited stains
on the inside of the tank.
Fig.
13
Remove the sponge filter from the
cover and check that the float is not
blocked and can move freely. Rinse the
tank, cover and filter with clean water
and fully dry it before reassembling.
Fig.
14
To reinsert the waste water tank, first
insert the bottom and then push in the
upper part until a click indicates the
successful installation.
Cleaning floor roller and cover
Note: It is recommended to clean and dry
the floor roller and cover after each use to
ensure best working conditions.
Fig.
15
Take o the cover by pressing the snap.
Fig.
16
Pull the lever at the end of the floor
roller to take it out. Clean the floor
roller and cover under running water.
Fig.
17
Insert the floor roller, first the side
without lever, then press down the
lever side to snap in.
If the device is not used immediately,
let the roller dry before installation.
Fig.
18
After cleaning, align the both sides of
the cover with the slots on both sides
of the floor cleaning unit, turn it down
and press the cover until it snaps in and
clicks.
IM_KVRWD21624_240810_V04_HR.indb 13IM_KVRWD21624_240810_V04_HR.indb 13 9/8/2024 10:32 AM9/8/2024 10:32 AM
Bekijk gratis de handleiding van Koenic KVRWD 21624, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Koenic |
| Model | KVRWD 21624 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8300 MB |
