Kluge KMKD-04M handleiding

Handleiding

123456789101112131415161718192021222324/ 24

Afdrukken

Je bekijkt pagina 18 van 24

17

EN

range specied below, depending on the climate class shown on

the nameplate. The appliance may malfuncon if kept outside

the specied ambient temperature range for a long me.

SN (extended – moderate) +10°C to +32°C

N (moderate) +16°C to +32°C

ST (subtropical) +18°C to +38°C

T (tropical) +18°C to +43°C

ICE CUBE MAKER OVERVIEW

1. Ice cube maker housing

2. Viewport

3. Water tank and ice cube bucket lid

4. Control panel

a. ON/OFF buon

b. cube size selecon buon

c. lack of water indicator light (ADD

WATER)

d. cube container full indicator light

(ICE FULL)

e. power indicator light (POWER)

f. small cube producon indicator

light (S)

g. large cube producon indicator

light (L)

5. Water tank

6. Ice cube dispenser

7. Venlaon grille

8. Power cord

9. Water drain plug

10. Ice cube bucket

11. Ice cube scoop

12. Device holder

BEFORE FIRST USE

1. Unpack the ice cube maker and remove all plasc bags, labelling sckers, lling materials and trans-

port locks.

2. Inspect for transport damage. If you suspect that the ice cube maker is damaged, do not use it.

Consult the seller.

3. Install the device holder - the holder can only be installed in the holes in one correct posion. Once

the handle is installed, it can be moved freely.

4. Place the ice cube maker on a rm, dry and stable surface, away from sources of heat and direct

sunlight, to maximize its performance. Keep a clearance of 10 cm minimum around the ice cube

maker to provide proper venlaon.

CAUTION! Do not use the ice cube maker outdoors.

CAUTION! Do not use the ice cube maker at extremely low or high temperatures. If the ambient

temperature is below 10°C or above 43°C, making ice cubes will be dicult.

5. Before using the ice cube maker, leave it at the room temperature for at least 1 hour aer delivery.

The ice cube maker needs this me to reach the ambient temperature and stabilize its refrigerant.

If you move the ice cube maker, wait at least 60 minutes before turning it on.

6. Verify that your power mains match the nameplate rangs of the ice cube maker. Plug the ice cube

maker to power outlets with a PE terminal only.

7. The ice cube maker makes ice cubes intended for human consumpon. You need to clean the ice

cube maker before the rst use, see Secon “CLEANING AND MAINTENANCE”.

123456789101112131415161718192021222324/ 24

Bekijk gratis de handleiding van Kluge KMKD-04M, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd