Handleiding
Je bekijkt pagina 53 van 142
51
EN
Lighting of burners equipped with safety thermocouples
(only certain versions, see gure 9, ref. Tc)
1. In case burners are tted with Flame Safety Device (FSD = Thermocouple,
gure 9, Tc), repeat operations described previously.
2. Once the ame is alight, keep the knob pressed for about 10 seconds to allow
the Flame Safety Device (FSD = Thermocouple) to warm up. If, at the end of
this time, the burner fails to alight, it means that Flame Safety Device (FSD =
Thermocouple) is not suciency heated. Repeat the operation.
Optimum use of the burners
To get the maximum yield with the minimum consumption of gas it is handy to
keep the following points in mind:
• Once the burner has been alighted, adjust the ame according to your needs,
from “Maximum” position (big ame) to “Minimum” position (little ame).
• Use proper pan size (with at bottom only) for each burner (see the table
below and gure 11).
• When the contents of the pan start boiling, turn the knob down to the
“Minimum” position with reduced rate (small ame).
• Always put a lid on the pan.
Figure 11
Pan diameter (Ø in cm)
Item num-
ber
Wok Rapid Semi-Rapid Auxiliary
10035464,
10046704,
10046706
24-26 – 20-22 10-15
10035465,
10046705,
10046707
24-26 24-26 20-24 10-15
10039896 – 22-24 – 10-15
Bekijk gratis de handleiding van Klarstein Illuminosa 4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Klarstein |
| Model | Illuminosa 4 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 11944 MB |
