Klarstein AlizeEdge handleiding

108 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 34 van 108
34
EN
Using the extractor hood as an exhaust air hood (with air extracted to
outdoors)
If the extractor hood has been tted at the factory with a carbon lter, this
must be removed. It is only practicable to use this when operating your hood in
circulation mode.
Converting the extractor hood to a circulation hood
If you wish to use an appropriately tted hood as a circulation hood, you must
mount the active carbon lter(s) to the fan motor before using the hood. The
active carbon lter(s) is/are included in the scope of supply with some models.
Otherwise you must obtain the active carbon lter(s) from the supplier of your
extractor hood. You must also change your hood over to the „Filter position“ at the
device provided (lever or ball handle).
Electrical connection
Before connecting the extractor hood, check that the voltage stated on the rating
plate (V) agrees with the supply voltage in your home. Never install the appliance
if the data on the rating plate does not agree with your supply voltage. You will
nd the rating plate inside the appliance, behind the grease lter.
If the appliance is not tted with a connector plug, a two-pole switch, conforming
to standards with a minimum open contact gap of 3 mm is to be installed by an
authorized tradesman in an easily accessible location. If the extractor hood is
tted with a standard connector plug, connect this to an easily accessible standard
socket.
Mounting the carbon lter
You will nd the mounting instructions for the carbon lter in its packaging. To
mount the carbon lter, remove the grease lter(s), t the carbon lter according
to its mounting instructions and ret the grease lter(s). For this cooker hood only
one carbon lter is needed.

Bekijk gratis de handleiding van Klarstein AlizeEdge, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkKlarstein
ModelAlizeEdge
CategorieAfzuigkap
TaalNederlands
Grootte9232 MB