Handleiding
Je bekijkt pagina 105 van 116
47
Installation of the cooker hood
EN
8.2 Choosing the mounting position
• For optimum extractor performance, select a position
of the appliance in the center above the cooktop.
• Check the route of electrical cables, pipes, etc. in the installation
environment to avoid drilling into them during installation.
• If possible, select the installation position so that the appliance
is easily accessible during and after installation, e.g. for cleaning
and maintenance.
• For recirculation mode, follow the corresponding instructions
under "... installation requrirements" in the section "Notes for
recirculation mode".
Mounting surface / substrate
• Check the desired mounting surface for load-bearing capacity
and strength with regard to the weight of the hood
and only use suitable mounting material.
Notes:
• The screws and plastic dowels supplied
are intended for solid masonry.
If necessary, replace them according to the substrate,
as described under "Mounting...".
• Make sure that the required drill hole depth
(dowel length + 10 mm) is possible at the selected
location in order to ensure a firm hold of the dowels.
• Check the mounting surface for unevenness
and level it out if necessary.
The mounting surface must be level and vertical.
Bekijk gratis de handleiding van KKT Kolbe FLAT 6006 ED, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | KKT Kolbe |
| Model | FLAT 6006 ED |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 8039 MB |
