Kimo C 310 handleiding
Handleiding
Je bekijkt pagina 24 van 34
➢ Press OK.
➢ Enter the security code then press OK.
➢ Go to the “Parameters” line then press OK.
➢ Go to “Board” line then press OK.
➢ Go to “Purge” line then press OK.
➢ Go to “Mode” line then press OK.
➢ Select “Run” with Down arrow then press OK.
➢ Go to “Purge duration” line then press OK.
➢ Enter the purge duration with Up/Down/Left/Right arrows then press OK to validate.
➢ Go to “Delay between two purges” then press OK.
➢ Enter the delay between 2 purges with Up/Down/Left/Right arrows then press OK to validate.
➢ Go to “Delay” line then press OK.
➢ Enter the delay with Up/Down/Left/Right arrows then press OK to validate.
The purge duration must be between 1 and 60 seconds.
The duration between 2 purges must be between 1 and 9999 minutes.
The delay duration must be between 1 and 60 seconds.
3.7. Activate an option
It is possible to buy one or several options. The rm will supply a code allowing to activate the required option.
To activate an option:
➢ Turn on the transmitter.
➢ Press OK.
➢ Enter the security code then press OK.
➢ Go to the “Options” line then press OK.
➢ Go to the line of the requested option then press OK.
The transmitter displays a message asking if you want to activate the option.
➢ Go to “Continue” then press OK.
The transmitter asks for an activation code.
➢ Enter the supplied activation code then press OK.
24
Congure the transmitter
Bekijk gratis de handleiding van Kimo C 310, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kimo |
| Model | C 310 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3908 MB |
