Kiloview P3 Mini handleiding
Handleiding
Je bekijkt pagina 46 van 48
Copyright@2024 KILOVIEW Electronics Co., LTD
P3 5G Wireless Bonding Encoder·User Manual
42
WEB Page Upgrade:
Click "System Settings" > "Firmware Upgrade," upload the downloaded upgrade package from the official website, and
then click "Firmware Upgrade."
After successfully uploading the firmware, the system will prompt for a restart. Please wait patiently during the restart
process. After the device restarts, the upgrade is successful.
Figure 57 Firmware Upgrade
Recovery Mode Upgrade:
If the device fails to start normally or access the Web management system, you can use Recovery Mode to upgrade or
update the system. During device startup, when the LCD screen displays "KILOVIEW," press and hold the P3 Mini LCD
screen continuously for 5 seconds or more to enter Recovery Mode.
Step 1: Prepare a USB drive and copy the downloaded firmware file from the official website to the USB drive.
Step 2: Insert the USB drive into P3 Mini. After the device boots (approximately 2 seconds), hold the screen until
the Kiloview logo appears, then hold it for another 5 seconds until the device enters Recovery Mode.
Step 3: Select "Recover from USB" (install firmware from USB) by clicking the touch button. After selection, the
upgrade can begin.
Step 4: During the firmware upgrade, it will prompt "Updating! Please keep the power on."
Bekijk gratis de handleiding van Kiloview P3 Mini, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kiloview |
| Model | P3 Mini |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8497 MB |
